EquipmentRecall 19V-659 · 2016–2017 Terex TLM

Terex South Dakota, Inc. recall 19V-659 covers 42 2016–2017 Terex TLM for a equipment problem, reported to NHTSA on September 17, 2019. The manufacturer's latest report (2021 Q2) shows 83% of affected vehicles repaired.

83%
Vehicles repaired35 of 42 · 2021 Q2
Vehicles affected421 model
ReportedSep 17, 2019Owners notified Oct 25, 2019
Complaints since0Same system, after the recall

Source: NHTSA recall 19V659000 and manufacturer quarterly reports. Started by the manufacturer.

What's wrong

The problem

Terex South Dakota, Inc. (Terex) is recalling certain TLM aerial-device vehicles equipped with external holding valve blocks. The incorrect holding valve was installed on the upper boom cylinder base end. As a result, if the hose for the upper boom raise function should burst while at maximum load and maximum side reach, the boom may drift down.

The risk

Uncontrolled movement of the boom can increase the risk of an injury.

What to do

The fix

Terex will notify owners, and dealers will replace the base end holding valve on the upper boom lift cylinder, free of charge. The recall began October 25, 2019. Owners may contact Terex customer service at 1-844-837-3948. Terex's number for this recall is SN675.

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Recall repairs are free. Confirm whether this recall is open on your vehicle by entering its VIN at nhtsa.gov/recalls.

Repair progress

How fast cars are being fixed

83%repaired

Share of affected vehicles repaired in each quarterly report the manufacturer filed with NHTSA.

0%50%100%2019 Q42021 Q2
1 model

Vehicles in this recall

Built from August 2, 2016 to February 14, 2017. Not every vehicle in these model years is included; check by VIN.